Casio XJ-360 - Manual (Page 47)

47
Using the Setup Menu
■Operational Info J Signal Name
This sub-menu item shows the signal name of the signal input to the projector. The “Signal
Name” column of the table under “Supported Signals” on page 58 shows the signal names
that are displayed by this sub-menu item.
■Operational Info J Resolution
This sub-menu item appears only when RGB is the input signal, and shows the resolution of
the RGB input signal in terms of vertical and horizontal pixels.
■Operational Info J Horizontal Frequency
This sub-menu item appears only when RGB, Component, S-VIDEO, or VIDEO is the input
signal. It shows the horizontal frequency of the input signal.
■Operational Info J Vertical Frequency
This sub-menu item appears only when RGB, Component, S-VIDEO, or VIDEO is the input
signal. It shows the vertical frequency of the input signal.
■Operational Info J Scan System
This sub-menu item appears only when RGB or Component is the input signal, and shows
the scanning frequency of the input signal. The input signal is interlace or non-interlace for
RGB signal input, and interlace or progressive for Component signal input.
■Operational Info J J J J Restore All Defaults
This sub-menu returns all of sub-menu items on the setup menu to their initial default
settings, except for the power on password on/off setting (Detailed Settings
J Power On
Password), the password, the language (Detailed Settings
J Advanced Settings 2 J
Language), and the lamp time (Operational Info J Lamp Time). This operation can be
performed regardless of the currently selected input source and regardless of whether or not
a signal is currently being input.
For details about this initialization procedure, see “To initialize all menu settings” on page 26.
■Operational Info J Reset Lamp Time
Use this sub-menu item to reset the lamp time to 0 hours. For details about replacing the
lamp and the initialization procedure, see “Replacing the Lamp” in the separate “User’s Guide
(Basic Operations)”.