Casio XJ-360 - Manual (Page 14)

Projection Operations
14
The freeze function stores the current projected image in projector memory, and projects it as
a still image.
To freeze the projected image
1.
On the remote controller, press the [FREEZE] key.
z This freezes the image that was being projected when you pressed the [FREEZE] key.
2.
To unfreeze the image, press the [FREEZE] key again or press the
[ESC] key.
Use the procedures in this section to display the pointer and to select its shape (arrow, bar).
You can use the pointer to point to a specific location of the projected image during a
presentation.
To display the pointer
Press the [POINTER/SELECT] key to display the pointer in the projected image.
The following operations can be performed while the pointer is displayed.
z Pressing the [STYLE] key (the [ENTER] key functions as the [STYLE] key while the
pointer is displayed) rotates the pointer, causes it to blink, etc. If you are using an arrow
pointer, for example, each press of the [STYLE] key cycles through four different pointer
orientations.
z The cursor keys can be used to move pointer around the image. Holding down a cursor
key moves the pointer at high speed.
Freezing the Projected Image (FREEZE)
Displaying the Pointer