Casio XJ-360 - Manual (Page 17)

17
Using the Setup Menu
Main menu Sub-menu Sub-menu Item Type
Input source
See page
R C S V –
Detailed
Settings
Volume Value Setting *6 35
Pointer Setting Screen 36
Low-noise Mode Selection
∗12 ∗12 ∗12 ∗12 ∗12
36
Power On Password Special
∗11
37
Change Password Special
∗11
37
Advanced Settings 1
Auto Input Detect Selection 40
Auto Keystone
Correction
Selection
∗13 ∗13 ∗13 ∗13 ∗13
40
Auto Adjust Selection
∗7
41
Show Screen Text Selection 41
Startup Screen Selection 42
No Signal Screen Selection 42
Advanced Settings 2
Auto Power Off Selection 43
RGB Input Setting Screen
∗8
44
Video Signal Setting Screen
∗9
45
S-Video Signal Setting Screen
∗10
45
Image Enhancement 1 Selection 45
Image Enhancement 2 Selection 45
Language Setting Screen 46
Restore Menu Defaults Execution 46
Operational
Info
Lamp Time Information 46
Input Signal Information 46
Signal Name Information 47
Resolution Information 47
Horizontal Frequency Information 47
Vertical Frequency Information 47
Scan System Information 47
Restore All Defaults Execution 47
Reset Lamp Time Execution 47
∗6 This setting is for the currently selected input source.
∗7 This setting can be configured only when the input source is RGB.
∗8 This setting can be configured only when the input source is RGB/Component.
∗9 This setting can be configured only when the input source is VIDEO.
∗10 This setting can be configured only when the input source is S-VIDEO.
∗11 This is a special sub-menu item that is different from other types.
∗12 The Low-noise Mode is available only when “Ceiling Mount” is turned off.
∗13 “On” is disabled when “Ceiling Mount” is turned on.