Casio XJ-360 - Manual (Page 40)

Using the Setup Menu
40
■Detailed Settings J Advanced Settings 1 J Auto Input Detect
This sub-menu lets you specify whether auto detect of the input source should be performed
whenever the projector is turned on (page 5).
Input Source Specific Menu Items
Setting Explanations
On: Turns on auto detection of the input source whenever the projector is turned on.
Off: Turns off auto detection of the input source whenever the projector is turned on.
Setting Storage
A single setting is stored, which is applied to all input sources.
■Detailed Settings J Advanced Settings 1 J Auto Keystone Correction
This sub-menu lets you specify whether auto keystone correction should be performed
whenever the elevation angle of the projector is changed (page 9).
Input Source Specific Menu Items
Setting Explanations
On: Turns on auto keystone correction.
Off: Turns off auto keystone correction.
Setting Storage
A single setting is stored, which is applied to all input sources.
z Turning on “Screen Settings J Ceiling Mount” (page 34) will cause “Auto Keystone
Correction” to turn off automatically. “Auto Keystone Correction” will not turn back on
again automatically if you turn off “Ceiling Mount” again.
z The “Auto Keystone Correction” setting cannot be changed while “Ceiling Mount” is turned
on.
Input Source Available Items (Parentheses indicate defaults.)
RGB (On), Off
Component
S-VIDEO
VIDEO
No Signal
Input Source Available Items (Parentheses indicate defaults.)
RGB (On), Off
Component
S-VIDEO
VIDEO
No Signal