Casio XJ-360 - Manual (Page 37)

37
Using the Setup Menu
■Detailed Settings J Power On Password, Change Password
This sub-menu lets you turn the power on password on and off.
While the password is turned on, projector operation is impossible unless the correct password
is entered.
For more information about the power on password, see “Password Feature” on page 52.
Input Source Specific Menu Items
Setting Explanation
On: Turns on the power on password, which requires input of a password to turn on
the projector.
Off: Turns off the password, which allows the projector to be operated without inputting
a password.
Setting Storage
A single setting is stored, which is applied to all input sources.
Initial Factory Default Password
The following is the 8-key operation you should perform to input the initial factory default
password.
[
S][X][T][W][S][T][W][X]
z Note that the projector’s password is not really a “word”, but rather a series of remote
controller key operations.
z If you need to keep projector operation secure, be sure to change the initial factory
default password to a different one as soon as possible.
z The password can be input using the remote controller only. Optimum security is ensured
by turning on the password and keeping the remote controller with you.
z For information about what you should do if you forget your password, see “If you forget
your password...” on page 52.
Input Source Available Items (Parentheses indicate defaults.)
RGB On, (Off)
Component
S-VIDEO
VIDEO
No Signal