Casio XJ-360 - Manual (Page 46)

Using the Setup Menu
46
■Detailed Settings J Advanced Settings 2 J Language
This sub-menu lets you specify the language to use for messages, setup menus, etc.
Input Source Specific Menu Items
Setting Storage
A single setting is stored, which is applied to all input sources.
z This setting is required the first time you turn on the projector. For more information, see
“Turning On the Projector” in the separate “User’s Guide (Basic Operations)”.
■Detailed Settings J Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Detailed Settings main menu to their
initial defaults, except for the power on password on/off setting (Detailed Settings
J Power On
Password), the password, and the language (Detailed Settings
J Advanced Settings 2 J
Language).
z You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z The Auto Adjust item is initialized only when RGB is selected as the input source. All
other items are always initialized, regardless of the currently selected input source.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 25.
Operational Info
■Operational Info J Lamp Time
This sub-menu item shows the cumulative number of hours the current lamp has been used
to date.
Use this value as a reference when deciding whether or not the current lamp needs to be
replaced. For details about replacing the lamp, see “Replacing the Lamp” in the separate
“User’s Guide (Basic Operations)”.
■Operational Info J Input Signal
This sub-menu item shows the currently selected input signal (RGB, Component, S-VIDEO, or
VIDEO). “----” is indicated here when there is no input signal.
Input Source Available Items
RGB English, French, German, Italian, Spanish, Swedish, Chinese
(Simplified), Chinese (Traditional), Korean, Japanese
Component
S-VIDEO
VIDEO
No Signal