Casio XJ-360 - Manual (Page 19)

19
Using the Setup Menu
This section explains projector operations you need to perform while configuring setup menu
settings. It also provides details about each sub-menu item type.
Basic Setup Menu Operations
The following is the general flow of the steps you need to perform when configuring setup
menu operations.
1.
Select the input source whose settings you want to configure.
2.
Press the [MENU] key.
z This causes the setup menu screen to appear in the upper left corner of the projected
image. At this time, only the main menu will be visible.
3.
Press the [
T] key.
z This will highlight the “Image Adjustment” on the main menu, indicating that it is
selected. Also, the “Image Adjustment” sub-menu will appear to the right.
z The items that appear in the sub-menu depend on the input source you selected in
step 1 and whether or not a signal is being input from the input source. For details,
see “Setup Menu Overview” on page 16.
Setup Menu Screen Operations
Main menu
Sub-menu
Currently selected
menu item