Casio XJ-360 - Manual (Page 10)

Projection Operations
10
Manual Keystone Correction
Manual keystone correction can be used to correct for vertical keystoning.
To use manual keystone correction
1.
Press the [KEYSTONE] key.
z This causes the keystone correction screen to appear on the projected image.
2.
Use the [
W] and [X] keys to correct for keystoning.
z Each press of [W] or [X] shifts the indicator on the currently selected bar left or right.
z Keystone correction is possible within the range that the indicator is able to move within
the selected bar. Depending on conditions, the indicator may not move all the way to
either end of the bar.
3.
To close the setup screen, move the cursor to “Close”, and then press
the [ENTER] key.
z You can also close the setup screen by pressing the [ESC] or [KEYSTONE] key.