Casio XJ-360 - Manual (Page 11)

11
Projection Operations
The color mode setting lets you specify the type of image you will be projecting, so the
projector can optimize image color.
To change the color mode setting
1.
Press the [COLOR MODE] key.
z This causes the color mode screen to appear on the projection image. The z
mark
indicates the current color mode setting.
z For details about each of the settings, see “Image Adjustment J Color Mode” on
page 28.
2.
Use the [
S] and [T] keys to move the cursor to the setting you want,
and then press the [ENTER] key.
z This moves the z
to item that is selected by the cursor, and applies the setting to the
image.
3.
To close the setup screen, move the cursor to “Close”, and then press
the [ENTER] key.
z You can also close the setup screen by pressing the [ESC] or [COLOR MODE] key.
Using Color Mode (COLOR MODE)