Casio XJ-360 - Manual (Page 31)

31
Using the Setup Menu
■Signal Settings J Noise Filter
This sub-menu provides a choice of noise filter levels to remove digital noise from the
projected image when RGB is selected as the input source. Note that the noise filter may not
be able to remove certain types of digital noise.
z This setting is possible only when RGB is selected as the input source and digital zoom
is not being used. The setting is saved for the RGB input source only.
z Turning off the projector automatically returns this sub-menu to its initial default setting
(Normal).
Input Source Specific Menu Items
■Signal Settings J Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Signal Settings main menu to their
initial default settings, except for the phase setting.
z This operation is possible only when RGB is selected as the input source and digital
zoom is not being used.
z “Signal Settings” main menu “Vertical Position”, “Horizontal Position”, and “Frequency”
settings are initialized for the current signal type (XGA/60Hz, SXGA/60Hz, etc.) only.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 25.
Screen Settings
■Screen Settings J Keystone Correction
This sub-menu lets you correct for vertical keystoning of the projected image.
z Vertical keystone correction can be performed regardless of the currently selected input
source.
z A single setting is stored, which is applied to all input sources.
Input Source Available Items (Parentheses indicate defaults.)
RGB Low, (Normal), High
Component None
S-VIDEO
VIDEO
No Signal