Sony MHC-MC1 - Manual (Page 8)

step 2: Setting up the surround
speakers (continued)
Adjusting the
voluihé''^^^^,,,
(For MHC^MC^V
To enjoy Dolby Pro Logic Surround sound,
turn the Dolby Pro Logic mode on, then
adjust the volume of each speaker using the
test tone that the system provides.
I
1
Press PRO LOGIC (or PRO LOGIC
ON/OFF on the remote).
"PRO LOGIC ON" appears.
Press T.TONE ON/OFF on the
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
Front (left) —f Center —► Front (right)
L
Rear
From your listening position, press
CENTER LEVEL (+/-) and
REAR LEVEL (+/-) on the remote
to adjust the volume.
The volume levels from each speaker
must become the same.
4
Press T.TONE ON/OFF when you
are done adjusting.
The test tone turns off.
Tip
If you turn VOLUME (or press VOLUME +/- on the
remote), all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround soimd.