Recording on a tape manually, Tips, Note – Sony MHC-MC1 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Tape Deck
Recording on a
tape manually
You can record from CD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of
the tape. The recording level is adjusted
automatically.
1
Insert a blank tape into deck B.
Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears.
Press • RFC.
Deck B stands by for recording. The
TAPE B O- indicator (for front side)
lights up.
I
4 Press DIRECTION repeatedly to
select to record on one side.
Select
“C^y
(or "RELAY") to
record on both sides.
5
Press
I I
PAUSE.
Recording starts.
6
Start playing the source to be
recorded.
To
Press
Stop recording
■.
Pause recording
II PAUSE.
Tips
• If you want to record from the reverse side, press
TAPE B <] to light its indicator after pressing
• REC.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY-NR so
that "DOLBY NR" appears after pressing # REC.
Note
Pressing FUNCTION with "TAPE B" selected starts
silent recording (blank recording).
36