Sony MHC-MC1 - Manual (Page 52)

I
Specifications (continued) Tape player section
Recording system 4-track 2
Inputs
VIDEO/MD IN (phono jacks):
voltage 250 mV/450 mV,
impedance 47 kilohms
Frequency response (DOLBY NR OFF)
40-13,000 Hz (±3 dB),
Outputs
VIDEO/MD OUT (phono jacks):
voltage 250 mV,,
impedance 1 kilohms
PHONES (stereo phone jack):
accepts headphones of
Wow and flutter
using Sony TYPE I
cassette
40-14,000 Hz (±3 dB),
using Sony TYPE II
cassette
±0.15% W.Peak (lEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
8 ohms or more
SPEAKER:
MHC-MC3AV:
MHC-MCl:
accepts impedance of 8 to
16 ohms
accepts impedance of 8 to
16 ohms
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
REAR SPEAKER:
MHC-MC3AV:
MHC-MCl:
accepts impedance of
16 ohms
accepts impedance of
16 ohms
CENTER SPEAKER (MHC-MC3AV only):
accepts impedance of
Tuning range
Antenna
Antenna termirxals
Intermediate frequency
87.5 -108.0 MHz
FM lead antenna
75 ohm unbalanced
10.7 MHz
SUPER WOOFER:
8 ohms
Voltage 1 V, impedance
1 kilohms
AM tuner section
Tuning range
CD player section
System
Laser
Compact disc and digital
audio system
Semiconductor laser
(X=780nm)
Emission duration:
Anteima
Anterma terminals
530- 1,710 kHz
(with the interval set at
10 kHz)
531- 1,710 kHz
(with the interval set at
9 kHz)
AM loop antenna
External antenna terminal
Intermediate frequency 450 kHz
Laser output
continuous
Max. 44.6 //W*
* This output is the value
measur^ at a distance
of 200 mm from the
cA)jective lens surface
on the Optical Pick-up
Block with 7 mm
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
aperture.
2 Hz - 20 kHz (±0.5 dB)
780 - 790 nm
More than 90 dB
More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
600 nm
Output Level -18 dBm
52