Sony MHC-MC1 - Manual (Page 22)

I
Playing a tape (continued)
To Do this
Stop play Press ■.
Pause Press II PAUSE (11 on the
remote). Press again to
resume play.
Fast-forward Press ►► for the front
side or for the reverse
side.
Rewind Press for the front
side or ►► for the reverse
side.
Remove the tape Press
Adjust the volume Turn VOLUME (or press
VOLUME (VOL) +/- on
the remote).
Tips
• Pressing TAPE A (or TAPE B) O- or <] when the
power is off automatically turns the power on and
starts tape playback if ti\ere is a tape in the deck
(One Touch Play).
• You can switch from another source to the tape
just by pressing TAPE A (or TAPE B) O- or ■<]
(Automatic Source Selection).
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY-NR so
that "DOLBY NR" appears.
Searching for the beginning of a
track (AMS*)
During playback, press K4 or pointing
in the same direction as the <3 or
indicator to go forward. Press the opposite
direction to go back.
The search direction, + (forward) or - (back),
and number of songs being skipped (1~9)
appear in the display.
Example: searching forward 2 songs
rnPE R: ; : f
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
- When the unrecorded space between songs is less
than 4 seconds long. '
- When completely different information is
recorded on the left and right channels.
- When there arc continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
- When the unit b placed near a television. (In this
case, we recommend moving ttie unit farther away
from the television or turning off the televbion.)
22