Sony MHC-MC1 - Manual (Page 12)

I
Inserting CDs (continued)
5
Insert a disc with the label side
facing right.
Notes
• Make sure you have inserted the disc into each
slot ata right angle to the rotary table, if the disc
is not put in straight, it may damage the unit or
the disc.
• Make sure the rotary table comes to a
complete stop before inserting or removing
discs.
6 Repeat steps 4 and 5 to insert
additional discs.
7
Close the front cover by pushirxg the
right edge of the cover until it clicks.
The rotary table turns and the disc slot at
the loading position is set to the playing
position.
Always close the front cover except
when you insert or remove discs.
After following steps I to 3 of "Inserting
CDs" on page 11, remove the discs. Then
close the front cover.
Notes
• Do not insert an empty 8 cm (3-inch) CD adaptor,
It may damage the unit.
• Do not attach anything such as seals or sleeves to
CDs. It may damage the unit or the disc.
• If you drop a di$< into the unit and the CD won't
go into the slot correctly, consult your nearest
Sony dealer.
• When transporting the unit, remove all discs from
the unit.
• If you want to remove the disc played, press
ENTER after opening the front cover. The disc
comes to the loading position. Remove the disc
after the rotary table comes to a complete stop.
Tips
• To play the disc you want independently, see
"Playing your favorite CD independently".
• You can display the original Disc Memos instead
of the disc numbers (see "Labeling a CD") to
locate the disc easily when you start playing.
When you select a CD-TEXT disc, the disc title is
displayed instead of the disc number.
12