Sony MHC-MC1 - Manual (Page 28)

I
Programming the CD tracks
(continued)
To You need to
Check the
program Press CHECK repeatedly.
After the last track, "-END-"
appears.
Clear a specific
track or disc Press CHECK until the track
or disc you want appears,
then press CLEAR.
Clear from the
last track or disc
Press CLEAR. Each time you
press the button, the last track
or disc will be cleared.
Clear the entire
program Press and hold CLEAR until
"CLEAR" is displayed.
Add tracks or
discs to the end
of the program Follow the programming
procedure.
Tips
• When you press CD O- 00, you can play the same
program again.
• When you press PROGRAM during Normal or
Shuffle Play, the program will be played after the
current track.
• If you replace discs, the programmed disc and
track numbers remain until you erase them. So,
the system plays only the existing disc and track
numbers. However, the disc and track numbers
that are not found in the system or on the disc are
deleted from the program, and the rest of the
program is played in the programmed order.
Playing your
favorite CD
independently
— Plus One Play
When you insert a disc into the PLUS ONE
slot, you can play the disc independently
from other discs. When using this function,
the system is automatically set to the 1 DISC
play mode.
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Open the front cover.
3
Press CD PLUS ONE.
The CD PLUS ONE indicator lights up
and "PLUS ONE" appears.
€2
i S 1 b L " P i i
28