Recording a cd by specifying track order, 1 insert a blank tape into deck b, Press or until the desired track number appears – Sony MHC-MC1 User Manual
Page 37: Continued, Recording a cd by specifying track, Order
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a CD by
specifying track
order
—
Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
CONTINUE
I
1
Insert a blank tape into deck B.
2
Press FUNCTION repeatedly until
"CD" appears in the display.
3
Press PROGRAM.
4
Turn SELECTOR until the desired
disc number or Disc Memo appears.
To program the whole disc, make sure
"AL" is displayed below "TRACK" and
skip to step 6.
Press or until the desired
track number appears.
When the disc you select has Disc Memo,
it appears and then switches to the
following display.
&
Track number
6
Press ENTER to program the track.
The programmed track and
corresponding step {playing order)
appear in the display.
Programmed track
¿¡J
-
-,n -
{c ul
c
} M
3-
A
fil
TJ
(b
Programmed disc Playing order
O
(b
continued
37