Sony MHC-MC1 - Manual (Page 23)

I
Recording from a
tape
— High-speed Dubbing
You can use TYPE 1 (normal) or TYPE II
(C1O2) tapes. The recording level is
automatically adjusted.
3
Press DIRECTION repeatedly to
select to record on one side.
Select
(or "RELAY") to
record on both sides.
4
Press I I PAUSE.
Dubbing starts.
To stop dubbing
Press ■.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you select when the tapes you use have
different lengths, the tape in each deck reverses
independently. If you select "RELAY", the tapes
in both decks reverse together.
• You don't have to set Dolby NR, since the tape in
deck B is automatically recorded in die same state
as the tape in deck A.
1
Press » and insert a recorded tape
in deck A and a blank tape in deck
B.
With the side
you want to
play facing
forward
2 Press HI-SPEED DUBBING.
Deck B stands by for recording.
23