Specifications, Amplifier section, U.s.a. models – Sony MHC-MC1 User Manual
Page 51: Audio power specifications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
Amplifier section
U.S.A. models:
uHC-MaAv
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 ohm loads both channels driven, from
70-20,000 Hz; rated 80 watts per charmel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to read output.
MHC-MC1
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 ohm loads both channels driven, from
70-20,000 Hz; rated 80 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to read output.
Australian model:
The following measured at AC 240 V, 60 Hz;
Front Speaker;
DIN power output (Rated)
70 + 70 watts
(8 ohms at 1 kHz,
DIN)
Continuous RMS power output (Reference)
80 + 80 watts
(8 ohms at I kHz,
10% THD)
Center Speaker:
DIN power output (Rated)
17.5 watts
(8 ohms at 1 kHz,
DIN)
Continuous RMS power output (Reference)
20 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
DIN power output (Rated)
8 + 8 watts
(8 ohms at 1 kHz,
DIN)
Continuous RMS power output (Reference)
10+ 10 watts
(8 ohms at 1 kHz,
lO*’/.. THD)
North American model:
MHC-MC3AV:
Front Speaker
Continuous RMS power output
80 + 80 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonic distortion
less than 0.09%
(8 ohms at 1 kHz,
40 W)
Center Speaker:
Continuous RMS power output
20 watts
(8 ohms at 1 kHz,
1%THD)
Rear Speaker:
Continuous RMS power output
10 + 10 watts
(16 ohms at 1 kHz,
1%THD)
MHC-MC1:
Continuous RMS power output
80 + 80 watts
(8 ohms at 1 kHz,
10% THD)
Total harmonic distortion
less than 0.09%
(8 ohms at 1 kHz,
40 W)
The following measured at AC 220 V, 60 Hz;
Front Speaker
DIN power output (Rated)
60 + 60 watts
(8 ohms at 1 kHz,
DIN)
Continuous RMS power output (Reference)
70 + 70 watts
(8 ohms at 1 kHz,
10% THD)
Center Speaker:
DIN power output (Rated)
15 watts
(8 ohms at 1 kHz,
DIN)
Continuous RMS power output (Reference)
17.5 watts
(8 ohms at 1 kHz,
10% THD)
Rear Speaker:
DIN power output (Rated)
7 + 7 watts
(8 ohms at 1 kHz,
DIN)
Continuous RMS fXJwer output (Reference)
8.5 + 8.5 watts
(8 ohms at 1 kHz,
10% THD)
I
>
a
a
continued
51