Sony DSC-F1 - Manual (Page 71)

others
Troubleshooting
Note
The SERIAL menu'
defines the serial speed
via the connecting cable.
After trying the following remedies, if the problem
persists, please consult "Sony Customer Technical
Support." Also refer to the operating instructions of
the Digital Still Camera DSC-Fl.
An error occurs during data transmission via cable.
• The connecting cable between the PC and the
Digital Still Camera is not fitted properly.
Connect the cable properly, (page 17)
• The power of the Digital Still Camera is not turned
on.
■> Set the POWER/Function dial of the Digital Still
Camera to "PLAY." (page 18)
• The WIRELESS setting of the Digital Still Camera is
not proper.
-> Select "OFF" in the WIRELESS menu of the
Digital Still Camera, (page 18)
• The serial speed of your computer does not match
that of the Digital Still Camera.
■> Select the same serial speed in the Settings dialog
box as set in the SERIAL menu of the Digital Still
Camera, (page 18)
■> Check that the serial speed selected in the Settings
dialog box matches that of your PC. Some PC
does not support all of the serial speed options,
(page 30)
• The Serial Port in the Settings dialog box is not
properly assigned.
-> Assign the Serial Port to which the connecting
cable is inserted, (page 30)
• The Serial Port selected in the Settings dialog box
may be used by another communication software.
■> Check which serial port the communication
software is used and assign another serial port for
either the "Sony Digital Still Camera Album
Utility" or the communication software.
(D
continued
Others 71