Sony DA V-HDX5OO - Manual (Page 100)

• If you change ihe HDMI connecliorL conned and
disconnecT the AC power cord (mains lead), or
have a power failure, set the |HDMI CONTROL]
setting in [CUSTOM SETUP] to [OFF], then set
the IHDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 90). ^
• Fordelailsonthe HDMI CONTROL function, see
the HDMI CONTROL Guide (supplied
separately).
No sound Is output trom the system and TV
while using the System Audio Control
function.
• Set the [AUDIO (HDMI)j setting in [CUSTOM
SETUPIto ]ON](page91).
• Make sure that the eonnecled TV is compatible
with the System Audio Control function.
• Fordelailsonthe Syslem Audio Control function,
see the HDMI CONTROE Guide (supplied
separately).
Self-diagnosis Function
(When letters/numbers appear in the
display)
When ihe selCdiagiiosis function is activated tt>
prevent the system from nialfunclioiiing, a .5.
character service number (e.g., C 13 .“iO) with a
combination of a letter and 4 digits appears on
the TV screen or front panel display. In tliis case,
check Ihe following table.
First 3
characters of
the service
number
Cause and/or corrective action
C l.t The disc is dirly.
^Clean Ihe disc with a soft dolh
(page 96).
C 31 The disc is not inserted correcl.ly.
^Resi.aruhe system, then rednsert.
the disc correctly.
EXX To prevent a malfunction, the
(xx is a number) system has performed the self­
diagnosis ftiiiction.
^Contact your nearest Sony
dealer or local authorized Sony
seiwice facility and give Ihe 5-
characler servdee number.
Example: E 61 10
When displaying the version
number on the TV screen
When you turn on the system, the version
number [VER.X.XXJ (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal syslem operation will not he possible.
Turn off the system, and then turn on the system
again to operate.
-VER.X.XX-
r i i t i i s
lOOi^s