Canon VB-C60 - Manual (Page 63)

2-5
VBAdmin Tools
When the camera is disconnected after start up, select
“Connect” from the File menu bar to display the
Connection Setting dialog.
Start Up VBAdmin Tools
4. VBAdmin Tools starts
You can start the Panorama Creation Tool, View
Restriction Tool, Preset Setting Tool, Motion Detection
Tool, Log Viewer or Admin Viewer by clicking the
button for each tool.
Tip
● Panorama Creation Tool, View Restriction Tool, Preset Setting Tool and Motion
Detection Tool cannot be launched simultaneously. Log Viewer and Admin Viewer
can be launched simultaneously.
● When connecting to another Canon network camera other than VB-C60, you may
not be able to use some of the tools.
7 FTP
To use the Panorama Creation Tool and the Log Viewer of the VBAdmin Tools, it is
necessary to connect to VB-C60 using FTP. The FTP connection mode can be selected
from the PASV mode or PORT mode.
●Use PASV mode
Check it when selecting the PASV mode. Normally, select PASV mode. Clear the check
box when using PORT mode.
Note
Note on Windows Vista/XP
If you start up VB Initial Setup Tool on Windows Vista/XP, Windows Security Alert
dialog may appear. If the dialog appears, click “Unblock”. Once you click “Unblock”,
the dialog box will not appear again.
3. A confirmation message is displayed
Click “OK”.
Note
If connecting to the camera with specifying IPv6 address, you cannot use Admin
Viewers with Internet Explorer.
COP
Y