Canon VB-C60 - Manual (Page 43)

1-29
Detailed Settings
▼Image Buffer
1 Frame Rate
Set the frame rate used when temporarily buffering images in the camera.
2 Pre-event Buffer (number of image frames)
Set the number of images to be buffered, which were captured prior to each event.
3 Post-event Buffer (number of image frames)
Set the number of images to be buffered, which were captured after each event.
You can configure following settings.
● Image Buffer
Setting for buffering images.
● Motion Detection
Setting for operations while motion detection is being activated.
● External Device Input
Setting for operations during external device input events.
● Interval Timer
Setting for interval timer for e-mail notification and upload operations.
● Sound Clip Upload
Setting for audio files to be registered.
Set Image Buffering, Motion Detection, Audio Playback, Interval Timer (Event)
12
12
3
12
12 1
12
12
2
Note
● The maximum size of image buffering is approximately 4 MB.
When you set a smaller image size, “Frame Rate”, “Pre-event Buffer”, or “Post-
event Buffer” may not be carried out as you set (
➞ P.1-21).
● When image buffering is not carried out as you set, a message is displayed in the
log events.
Make sure that there is no log event occurring before use the function (
➞ P.1-21).
COP
Y