Canon VB-C60 - Manual (Page 26)

1-12
Set the Date and Time (Date and Time)
2 Date, Time
Configure the following settings depending on the 1 “Setting Method”.
Set manually
Manually enter the date and time in “Year/Month/Day” format for the date and in “hh:mm:ss”
format for the time. Use 2 digits for the month, day and time.
Example: Enter “2008/08/23” and “13:23:04” for 1:23:04 PM, August 23 2008.
Synchronize with NTP server
Enter the NTP server IP address, so that the time is synchronized with the NTP server’s
time.
Synchronize with NTP broadcast
The time is synchronized with the NTP broadcast’s time.
Synchronize with computer time
The time is synchronized with the date and time of the computer currently accessing the
camera. The time zone is also automatically selected.
3 Time Zone
Select the appropriate time zone.
Tip
● After applying the settings by clicking “OK”, “Setting Method” is automatically set
to “Set manually”.
● When “Synchronize with NTP server” is selected, if the camera cannot connect to
the NTP server because of the wrong IP address of the NTP server or other reasons,
the date and time will not be changed.
● The Time Zone does not support Daylight Savings Time.
COP
Y