Canon VB-C60 - Manual (Page 13)

xiii
Camera’s Top Page
User Authentication for Accessing the Setting Menu or Admin Viewer
User authentication is required to access the “Setting
Menu” or “Admin Viewer”.
The factory default setting is as follows.
User name : root
Password : VB-C60
The user name “root” is the Administrator account of
VB-C60.
Note
● When Administrators and Authorized users use the VB-C60 viewer on the same PC,
it is strongly recommended not to check the “Remember my password” checkbox.
● Be sure to enter the correct user name and password. If entering a wrong one, try
again with the correct name and password.
● Be sure to change the Administrator password for system security. Do not forget
the new password.
● If you forgot the Administrator password, press the camera’s reset switch to restore
the factory default setting (
➞ P.5-15). However, note that all settings are restored
to the factory default settings.
● If you need to delete sample pages (➞ P.4-4) for security reasons, be sure to
access the following path using FTP and copy the files to PC or other devices for
backup, before deleting.
Path to the Japanese version sample: /mnt_flash/www/html/sample/
Path to the English version sample: /mnt_flash/www/html/sample/
To restore deleted sample pages, you need to write back the copied files to the
above path. So, be sure to back up the files before deleting sample pages.
Tip
For more information on VB-C60 viewer and the user type, see Chapter 3 “VB-C60
Viewer” (
➞ P.3-2).
from Setting Page
from Admin Viewer
COP
Y