Dell Vostro 1000 (Mid 2007) - Manual (Page 101)

Adding and Replacing Parts
101
Keyboard
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 89.
2 Open the display.
3 Remove the hinge cover. See "Hinge Cover" on page 100.
1 hinge cover 2 scribe
1
2
book.book Page 101 Friday, October 19, 2007 2:03 PM