Dell 1710/n Mono Laser Printer - Manual (Page 32)

your computer screen.
Insert the Drivers and Utilities CD into your computer. 1.
The Wizard automatically searches for an appropriate driver.
Scroll through the list of drivers until you see D:\Drivers\Print\Win_2kXP\dkaay2da.inf selected
in the Location column. Instead of D:\ you will see the letter of your CD-ROM drive. 2.
Click Next. 3.
The wizard copies all of the necessary files and installs the printer drivers.
Click Finish when the software is installed. 4.
Run the Installation Software . 5.
Using Windows 2000 With a USB or Parallel Cable
When you attached the cable and turned on the printer, the Found New Hardware Wizard appeared on
your computer screen.
Insert the Drivers and Utilities CD, and then click Next. 1.
Select Search for a suitable driver, and then click Next. 2.
Select Specify a location only, and then click Next. 3.
Browse to the location of the printer driver on the Drivers and Utilities CD. 4.
D:\Drivers\Print\Win_2kXP\
Replace D:\ with the letter of your CD-ROM drive (for example, type D:\ where D is the drive letter of
your CD).
Click Open, and then click OK. 5.
Click Next to install the driver that is displayed. 6.
D:\Drivers\Print\Win_2kXP\dkaay2da.inf
Click Finish when the software is installed. 7.
Run the Installation Software . 8.
Using Windows NT With a Parallel Cable
NOTE: You need administrative access to install printer drivers on your computer.