Dell 1710/n Mono Laser Printer - Manual (Page 62)

Secondary error code
What this light sequence means:
The printer memory does not have the free space necessary to collate the
print job.
This may happen due to one of these errors:
Memory is full.
A page is too complex to print.
A page is shorter than the set page margins.
Memory is insufficient to save what is in the buffer.
What you can do:
Press Continue to clear the message and continue printing the job
(the job may not print correctly.)
Press and release Cancel to cancel the print job.
Press and hold Cancel to reset the printer.
To avoid this error in the future:
Simplify the print job. Reduce the complexity of the page by
reducing the amount of text or graphics on the page and deleting
unnecessary downloaded fonts or macros.
Install additional printer memory (see
Installing an Optional
Memory Card ).
Secondary error code
What this light sequence means:
The printer has received a request for a PPDS font which is not installed.
What you can do:
Press and release Cancel to cancel the print job.
Press and hold Cancel to reset the printer.
Press Continue to clear the message and continue printing.