Removing expansion-card riser 1, Back of the system. see figure 3-26, D guide. see figure 3-26 – Dell POWEREDGE R710 User Manual

Page 123: Latch. see figure 3-26

Installing System Components

123

Figure 3-26.

Removing or Installing an Expansion Card

Removing Expansion-Card Riser 1

CAUTION:

Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.

NOTE:

You must remove all expansion cards from the expansion-card riser before

removing the riser from the system.

NOTE:

The system will not start with a riser board removed.

1 Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

front card guide

expansion-card riser 2

expansion-card connector

expansion-card guide latch

expansion card