Removing the microsd card reader support bracket, Removing the microsd card reader, Support bracket – Dell PowerEdge C8000 User Manual
Page 186

186
Installing System Components
5 If applicable, replace the mezzanine card. See "Installing the Infiniband
Mezzanine Card" on page 179 or "Installing the 10 GbE Mezzanine Card"
6 If applicable, replace the RAID battery. See "Installing the RAID Battery"
7 Replace the front cover. See "Installing the Front Cover" on page 149.
8 Replace the sled. See "Installing a Sled" on page 144.
Removing the MicroSD Card Reader Support Bracket
1 Remove the sled from the enclosure. See "Removing a Sled" on page 143.
2 Remove the front cover. See "Removing the Front Cover" on page 148.
3 If applicable, remove the RAID battery. See "Removing the RAID Battery"
4 If applicable, remove the mezzanine card. See "Removing the Infiniband
Mezzanine Card" on page 176 or "Removing the 10 GbE Mezzanine Card"
5 Remove the MicroSD card reader. See "Removing the MicroSD Card
6 Remove the two screws securing the MicroSD card reader support bracket.
7 Lift the support bracket out of the sled tray. See Figure 3-33.