Installing the rpm package with dkms support – Dell Serial Attached SCSI 6iR Integrated and Adapter User Manual
Page 35

Driver Installation
33
4 In the Disk Order window, change the disks to the following order:
/dev/sdb
/dev/sdc (if present)
/dev/sda
5 Click OK and then click Finish to return to the Installation Settings
screen.
6 Continue with the SUSE Linux Enterprise Server 10 installation.
Installing the RPM Package With DKMS Support
Perform the following steps to install the RPM package with DKMS support:
1 Uncompress the gzipped tarball driver release package
2 Install the DKMS package using the command:
rpm –ihv dkms-
3 Install the driver package using the command:
rpm –ihv
megaraid_sas-
NOTE:
Use
rpm -Uvh
package.
4 If the previous device driver is in use, a reboot is required for the updated
driver to take effect
5 Verify that the driver has been loaded.
Upgrading the Kernel
When upgrading to a new kernel, you must reinstall the DKMS-enabled
driver packages. Perform the following steps to update or install the driver for
the new kernel:
1 In a terminal window, type the following:
dkms build -m
-k
dkms install -m
-k
2 To check whether the driver is successfully installed in the new kernel,
type:
dkms status
book.book Page 33 Monday, September 15, 2008 2:47 PM