Dell Serial Attached SCSI 6iR Integrated and Adapter - Manual (Page 22)

20
Hardware Installation
Figure 4-1. Installing a SAS 6/iR Adapter
7 Tighten the bracket screw, if any, or use the system’s retention clips to
secure the controller to the system’s chassis.
8 Connect the cables from the end devices or the backplane of the system to
the controller. See Figure 4-2.
1 bracket screw 2 SAS 6/iR Adapter 3 PCI-E slot
4 PCI bracket 5 filler bracket
3
2
5
1
4
book.book Page 20 Monday, September 15, 2008 2:47 PM