Dell KVM 4161DS - Manual (Page 149)

Migrating Your Remote Console Switch 133
7
Migrating Your Remote Console
Switch
If you have an existing installation of Remote Console Switches and are using
the Remote Console Switch Software Appliance Management Panel (AMP),
follow the procedures in this chapter to migrate the switches from the
Remote Console Switch Software to the on-board web interface.
NOTE: The on-board web interface is not supported on 2161DS Remote Console
Switches so switches of this model cannot be migrated. Use the Remote Console
Switch Software to manage 2161DS Remote Console Switches; see the Dell Remote
Console Switch Software User’s Guide or help for more information.
Accessing the AMP
You will start from the Remote Console Switch Software AMP to to migrate
the Remote Console Switch to the on-board web interface.
To access the AMP:
1 Click the Remote Console Switches tab in the Explorer.
2 Double-click a Remote Console Switch from the Unit Selector pane.
-or-
Select a Remote Console Switch from the Unit Selector pane, and then
click the Manage Remote Console Switch task button.
-or-
Right-click a Remote Console Switch in the Unit Selector pane. A pop-up
menu appears. Select Manage Remote Console Switch.
-or-
Click a Remote Console Switch in the Unit Selector pane and press
. A password prompt appears.
NOTE: If there is a Configure Remote Console Switch task button, rather than a
Manage Remote Console Switch task buton, that Remote Console Switch has
already been migrated to the on-board web interface.
3 Type your username and password and click OK. The AMP dialog box
appears.