Dell Dimension L___cx - Manual (Page 132)

B-18 Dell Dimension L Series Systems Reference and Troubleshooting Guide
Clearing NVRAM
To clear NVRAM for all devices and restart the system, VRAM for all devices and restart the system, perform the following steps:
1. Enter the system setup program as described at the beginning of this appendix.
2. Press the right-arrow key to move to the Advanced menu.
3. Select the Boot Configuration guration submenu by pressing .
4. Press the down-arrow key to highlight Reset Config Data. Then press the plus
(+) key to change the setting to
+) key to change the setting to Yes (refer to Table B-4).
5. Press to exit the program and m and restart the system.