Dell Dimension L___cx - Manual (Page 122)

B-8 Dell Dimension L Series Systems Reference and Troubleshooting Guide
IDE Configuration Submenu
Figure B-5. IDE Configuration Submenu
Legacy
USB Support Set to Disabled if legacy USB support is not desired. Auto
(default) and Enabled allow support for legacy USB devices.
w support for legacy USB devices.
IRQ5 Reserved (default) indicates the IRQ is reserved for use by
legacy systems. Available indicates that a specific IRQ is avail-
able on the system.
Table B-6. IDE Configuration Submenu Options
Option Function
IDE controller E controller Configures the integrated primary and secondary EIDE con-
trollers and detects the types of drives attached to them. If
set to Primary, Secondary, or Both, the designated control-
ler(s) are enabled, and the types of drives attached are
displayed. If set to either Primary or Secondary, the other
controller is not enabled and the IRQ it normally uses
becomes available. If set to Disabled, the system cannot
detect any drives attached to the controllers and displays
None for all four IDE drive options.
NOTE: The Glossary in the system Help defines abbreviations and acronyms.
Table B-5. Peripheral Configuration Submenu Options (continued)
Option Function
NOTE: The Glossary in the system Help defines abbreviations and acronyms.