Dell KVM 1081AD/ KVM 2161AD - Manual (Page 87)

Using the Viewer xxx | xxx 87
• Select a Remote Console Switch from the Unit list, then click the
Manage Appliance button.
• Right-click on a Remote Console Switch in the Unit list. Select
Manage Appliance from the pop-up menu.
• Select a Remote Console Switch in the Unit list and press Enter.
3 Select the Global - Sessions subcategory.
4 Select Enable Share Mode in the Connection Sharing area.
5 You can choose to select Automatic Sharing. This enables secondary users
to automatically share a KVM session without first requesting permission
from the primary user.
To share a digital connection, complete the following steps:
1 Click the Devices button in the Explorer.
2 Complete one of the following steps:
• Double-click on the target device in the Unit list.
• Select the target device, then click the Connect Video button.
• Right-click on the target device. Select Connect Video from the pop-up
menu.
• Select the target device and press Enter.
When another user is viewing this target device, a message indicates
that the target device is already involved in a KVM session.
If connection sharing is enabled on the switch and your access rights (as
compared with those of the primary user) allow it, you are prompted to
either share or preempt the existing session.
1 If the option is available, select Share.
2 Complete one of the following steps: