Dell KVM 1081AD/ KVM 2161AD - Manual (Page 16)

16 xxx | Installation xxx
2 If AutoMount is supported and enabled, proceed to step 3.
-or-
If your system does not support AutoMount:
Mount the CD-ROM volume by executing the following command:
mount -t iso9660 -ro mode=0555
Replace “device” with the name of the CD-ROM on your machine and
mount point with the name of the desired mount point. For example,
to mount a CD-ROM which is the second IDE unit on /mnt, execute
the command:
mount -t iso9660 -ro mode=0555 /dev/hdb /mnt
3 At the command-line, execute the following command to change the
working directory to the mount point:
cd /mnt
4 Execute the following command to start the install program:
sh ./linux/setup.bin
5 Follow the on-screen instructions.
Uninstalling the Software
To uninstall the software on Microsoft Windows operating systems starting at
the Control Panel, complete the following steps:
1 Open the Control Panel and select Add/Remove Programs. A sorted list of
currently installed programs opens.
2 Select the RCS entry.
3 Click the Change/Remove button. The uninstall wizard starts.
4 Click the Uninstall button and follow the on-screen instructions.
To uninstall the software on Microsoft Windows operating systems using a
command window, complete the following steps: