Dell XPS M1210 (MXC062, Mid 2006) - Manual (Page 48)

Display : Dell XPS M1210 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/display.htm[2/21/2014 11:15:04 AM]
Display Bezel
1 rubber bumper/screw covers (4) 3 display bezel
2 M2.5 x 5-mm shoulder screws (4) 4 display back cover
5 hinge pins (2)
Removing the Display Bezel
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your
Computer ) before working inside the computer.
1. Follow the instructions in Before Working Inside Your Computer .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the four rubber bumper/screw covers.
4. Remove the four M2.5 x 5-mm shoulder screws at the corners of the bezel.
NOTICE: Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel and
the display panel.
5. Use your fingers to separate the bezel from the display back cover:
a. Starting at the center of the bottom of the bezel, lift the inside edge by pulling up and slightly downward toward
the outside edge of the display assembly to unsnap the bezel from the display back cover.
b. Repeat step a to release the snaps around the rest of the bezel and lift it away from the display panel.