Dell XPS M1210 (MXC062, Mid 2006) - Manual (Page 38)

Hard Drive Bay/ExpressCard Cage Assembly: Dell XPS M1210 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/hdbay.htm[2/21/2014 11:14:59 AM]
Back to Contents Page
Hard Drive Bay/ExpressCard Cage Assembly
Dell™ XPS™ M1210 Service Manual
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your
Computer ) before working inside the computer.
NOTE: You can remove the hard drive bay without removing the ExpressCard cage from the bay.
1. Follow the instructions in Before Working Inside Your Computer .
2. Remove the hinge cover (see Removing the Hinge Cover ).
3. Remove the keyboard (see Keyboard ).
4. Remove the display assembly (see Removing the Display Assembly ).
5. Remove the palm rest (see Removing the Palm Rest ).
6. Remove the fan (see Fan ).
7. Loosen the two captive screws on the ExpressCard cage connector.
1 ExpressCard cage 4 hard drive bay 7 ExpressCard cage connector with captive
screws (2)
2 ExpressCard eject
button
5 pull-strap 8 ExpressCard cage connector on system
board
3 captive screw 6 M2.5 x 5-mm
screw
8. Remove the M2.5 x 5-mm screw that attaches hard drive bay to the computer base.