Replacing the system board – Dell XPS M1210 (MXC062, Mid 2006) User Manual
Page 44
System Board: Dell XPS M1210 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/sysboard.htm[2/21/2014 11:15:02 AM]
1 modem cable
connector on
system board
3 computer base
5 cable connector for the
internal card with Bluetooth
wireless technology
2 system board
4 system board connector for the
internal card with Bluetooth
wireless technology
Replacing the System Board
1. Replace in reverse order all of the components that you removed in
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the
computer. Failure to do so may result in damage to the computer.
2. Turn on the computer.
NOTE:
If you use a BIOS update program CD to flash the BIOS, press
set up the computer to boot from a CD this one time only. Otherwise, you must enter the system setup program to
change the default boot order.
3. Insert the flash BIOS update program CD that accompanied the replacement system board into the optical drive. Follow
the instructions that appear on the screen. See
for further information.
4. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag.