Display : dell xps m1210 service manual, Display, Removing the display assembly – Dell XPS M1210 (MXC062, Mid 2006) User Manual
Page 45: Display assembly
Display : Dell XPS M1210 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/display.htm[2/21/2014 11:15:04 AM]
Display
Dell™ XPS™ M1210 Service Manual
Display Assembly
Removing the Display Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
) before working inside the computer.
1. Follow the instructions in
Before Working Inside Your Computer
.
2. Turn the computer upside down and loosen the captive screw on the communications card cover.
NOTE:
You must detach the Mini-Card (WLAN and/or Mobile Broadband) antenna cables (see
) before you can
remove the display assembly. If a Mini-Card is installed, disconnect the antenna cables from the card(s). If one is not
installed, detach the antenna cables from their secured location.
3. Disconnect the antenna cables from the Mini-Card(s), if applicable.
4. Turn the computer top-side up.