Dell Dimension 2300 - Manual (Page 81)

Adding Parts 81
8 Align the notches on the bottom of the module with the crossbars in
the connector.
NOTICE: To avoid breaking the memory module, do not press near the middle
of the module.
9 Insert the module straight down into the connector, ensuring that it
fits into the vertical guides at each end of the connector. Press firmly
on the ends of the module until it snaps into place.
If you insert the module correctly, the securing clips snap into the
cutouts at each end of the module.
10 Replace the computer cover (see page 82).
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
11 Connect your computer and devices to electrical outlets, and turn
them on.
securing clips (2)
notches (2)
step 7
memory module
cutouts (2)
connector
step 8
step 9
memory module connectors
crossbars (2)