Dell 2150cn/cdn Color Laser Printer - Manual (Page 463)

Troubleshooting Guide 461
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Action Yes No
1 Ensure that the SSF is properly inserted.
Does this solve your problem?
The task is
complete. Proceed to the
action
corresponding
to the type of
the print media
being used:
• Thick - 2a
• Thin - 2b
• Coated - 2c
• Envelope -
2d
If performing
manual duplex
printing, go to
action 2e.
If using paper
other than the
above or if not
performing
manual duplex
printing, go to
action 2f.
2a Use thick paper that is 216 g/m 2 or less.
Does this solve your problem?
The task is
complete. Go to action 3a.
2b Use thin paper that is 60 g/m 2 or more.
Does this solve your problem?
The task is
complete. Go to action 3a.
2c Load coated paper one sheet at a time.
Does this solve your problem?
The task is
complete. Go to action 3b.
2d Ensure that the envelope is properly loaded in the
SSF as instructed in "Loading an Envelope in the
SSF."
Does this solve your problem?
The task is
complete. Go to action 3c.
2e Ensure that the print media is not curled.
Does this solve your problem?
The task is
complete. Go to action 3a.