Dell 2150cn/cdn Color Laser Printer - Manual (Page 112)

110 Installing Printer Drivers on the Windows Computers
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section10.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before
you continue, you must enter a valid IP address.
6 Specify the printer settings, and then click Next.
a Enter the printer name.
b If you want other users on the network to access this printer, select the
Share this printer with other computers on the network, and then
enter a share name that users can identify.
c If you want to set the printer as default, select the Set this printer as
default check box.
d If you want to restrict color printing, select the appropriate Dell
ColorTrack option. Enter the password when Color-Password
Enabled is selected for Dell ColorTrack.
7 Select the software and documentation you want to install, and then click
Install.
If you want to change the installation destination, click Input and specify
new location.
8 Click Finish to exit the wizard when the Congratulations! screen appears.
Use the Dell Printer Configuration Web Tool to monitor the status of your
network printer without leaving your desk. You can view and/or change the
printer settings, monitor toner level, and acknowledge the timing of ordering
replacement consumables. You can click the Dell supplies link for ordering
supplies.
NOTE: The Dell Printer Configuration Web Tool is not available when the
printer is directly connected to a computer or a print server.
To launch the Dell Printer Configuration Web Tool, type the printer's IP
address in your web browser. The printer configuration appears on the screen.
You can set up the Dell Printer Configuration Web Tool to send you an e-mail
when the printer needs supplies or intervention.
To set up e-mail alerts:
1 Launch the Dell Printer Configuration Web Tool.
2 Click E-Mail Alert link.
3 Under E-Mail Server Settings, enter the Primary SMTP Gateway, Reply
Address, and your or key operator's e-mail address in the e-mail list box.