Dell 2150cn/cdn Color Laser Printer - Manual (Page 271)

Understanding the Tool Box Menus 269
Date & Time
Purpose:
To specify the date and time.
Values:
Low Toner Alert
Msg On * Shows the alert message when the toner
is low.
Off Does not show the alert message when
the toner is low.
Panel Language English * Sets the language to be used on the
operator panel.
French
Italian
German
Spanish
Danish
Dutch
Norwegian
Swedish
Apply New Settings After you change the settings, click this
button to apply the changes.
Restart printer to apply new settings Click this button to apply the changes.
*1 Enter 3 to put the printer in the power saver timer mode 3 minutes after it finishes a
job. This uses much less energy, but requires more warm-up time for the printer.
Enter 3 if your printer shares an electrical circuit with room lighting and you notice
lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this
keeps the printer ready to operate with minimum warm-up time. Select a value
between 1 and 30 minutes for the power saver timer mode if you want a balance
between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver timer
mode when it receives data from the computer. You can also return the printer to the
standby mode by pressing any button on the operator panel.
*2 This item is available only when the optional 250-sheet feeder is installed.
*3 This item is available only for Dell 2150cdn Color Printer.
*4 This item is available only when the optional 512 MB memory module is installed.