Dell XPS M1330 (M1330, Mid 2007) - Manual (Page 141)

Adding and Replacing Parts
141
NOTICE:
To prevent damage to the memory module connector, do not use tools to
spread the memory module securing clips.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
3 Use your fingertips to carefully spread apart the securing clips on each end
of the memory module connector until the module pops up.
1 M2.5 x 5-mm screw 2 captive screws (3)
1 2
book.book Page 141 Tuesday, October 7, 2008 6:00 PM