Dell XPS M1330 (M1330, Mid 2007) - Manual (Page 140)

140
Adding and Replacing Parts
3 Replace the module cover.
4 Insert the battery into the battery bay, or connect the AC adapter to your
computer and an electrical outlet.
5 Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start
→ Help and Support→ Dell System Information.
Removing the DIMM 2 Memory Module
The DIMM 2 memory module is located directly above the DIMM 1 memory
module on the bottom of the computer.
1 Follow the procedures in "Before You Begin" on page 127.
2 Turn the computer over and loosen the three captive screws and the M2.5
x 5-mm screw. Remove the module cover.
1 tab 2 notch
1
2
book.book Page 140 Tuesday, October 7, 2008 6:00 PM