Optical drive – Dell OptiPlex 960 (Late 2008) User Manual
Page 79

4.
Align the shoulder screws on the media card reader with the shoulder screw slots, and gently slide it into the bay until it clicks into place.
5.
6.
Attach the power and data cable to the media card reader and to internal USB connector on the system board (see
System Board Components
).
7.
Perform the procedure
After Working on Your Computer
).
8.
Verify that your computer works correctly by running the Dell Diagnostics (see the Dell
™
Technology Guide).
Optical Drive
1
media card reader
2
shoulder screws (4)
3
shoulder screw slots (2)
1
data/power cable
2
media card reader
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.