Dell POWEREDGE M1000E - Manual (Page 81)

Access Gateway Administrator’s Guide 61
53-1001760-01
Considerations for the Brocade 8000
3
Policy and feature support
The following AG policies and features are not supported on the Brocade 8000.
• Access Gateway Cascading
NOTE
This is not supported on the Brocade 8000 Core AG (the Brocade 8000 is only supported on an
Edge AG).
• Automatic Load Balancing
• Auto Port Configuration Policy
• Persistent ALPA
• Device Load Balancing
Fabric OS commands
This section describes differences in using Fabric OS commands on the Brocade 8000 in AG mode.
• The following commands are not supported on the Brocade 8000 in AG mode:
- ag --pgmapadd
- ag --pgmapdel
- ag --pgsetmodes
- ag --pgdelmodes
- ag --pgfnmtov
- ag --persistentalpaenable
- ag --printalpamap
- ag --deletepwwnfromdb
- ag --clearalpamap
- ag --wwnmapshow
- ag --addwwnmapping
- ag --delwwnmapping
- ag --addwwnpgmapping
- ag --delwwnpgmapping
- ag --wwnmappingenable
- ag --wwnmappingdisable
- ag -delwwnfailovermapping
- agautomapbalance
- portcfgnport