Dell PowerEdge VRTX User Manual
Page 110
Error Code
Message Information
PST0143
Message
Intel Trusted Execution Technology (TXT) fatal error.
LCD Message
Intel Trusted Execution Technology (TXT) fatal error.
Details
TXT boot failed. This could be related to memory errors or an error
with the system TXT configuration. A socketed TPM module may
have been removed.
Action
Check TPM presence. Remove and reapply input power. If the issue
persists, see
.
PST0192
Message
Shut-down test failed.
LCD Message
Shut-down test failed. Power cycle system.
Details
System BIOS shutdown test failed during POST.
Action
Check system event log for CMOS battery exceptions. Remove and
reapply input power. If the issue persists, see
PST0193
Message
BIOS POST memory test failed.
LCD Message
BIOS POST memory test failed. Check memory devices.
Details
System BIOS POST memory test failed.
Action
Compare system memory installation to supported system memory
configurations. Reduce system configuration to minimum memory
configuration.
PST0194
Message
Remote access controller configuration failed.
LCD Message
Remote access controller configuration failed. Check screen
message.
Details
System BIOS could not configure the Remote Access controller.
Action
Cycle input power and power on the system. If the issue persists, see
PST0195
Message
CPU configuration failed.
LCD Message
CPU configuration failed. Check screen message.
Details
The current processor configuration is unsupported or encountered a
fatal exception during POST.
Action
Review system processor configuration and reduce the system to the
minimum configuration.
PST0196
Message
Incorrect memory configuration.
110